GSM for Alarm System

GSM for Alarm System

 

1. Telecom landline backup. Usually, the alarm panel will use telephone line as the main transmission and use GSM modem as the backup. If  landline is been cut by the intruder, the alarm will call out using GSM modem. This methods is widely use in the places that security is highly important. For example, bank, jewelry shops, notebook house, ATM machines and etc where double protection on properties is required.
 
2. The second function is connecting the GSM dialer to the alarm panel as the main communicator and use at the places without telecom landline
 
3. This unit also acts like the low cost basic alarm system. It also can use like the GSM alarm system without any alarm panel
 
It can report to 8 telephone numbers or Alarm Receiving Center by itself. The design of WT-1010 also completed with 3 relay output to achieved remote controlling. For example, it can use to turn on/off lighting, AC, refrigerator remotely though SMS.
 
Furthermore, 3 input connect to the input panel, when there is short circuit impulse, the WT-1010 will sent the sms to the programmable phone number.

For example Zone 4 is connected to the electrical door, when there is intruder or the electrical door is opened illegally, WT-1010 will sent sms to notify the owner.  
 
 
FEATURES
 
1.      Panel compatibility - Allows any contact ID alarm panel to transmit alarms over using WT 1010C2 to any Alarm Receiving Center (ARC).
 
2.      The GSM dialer also build in the Contact ID format and able to transmit the signal to any Central Monitoring Station (CMS) by itself without using alarm panel   
 
3.      Provide 3 inputs / 3 outputs SMS function. Any short circuit impulse, it will send out the SMS from the different zone. SMS contents are able to change to any languages.
 
4.      Standby recharger battery to prevent power failure or electricity cut off by intruded. The GSM dialer will function as normal when no electricity supply.
 
5.      Automatically call to 8 pre-program phone numbers while alarming. The WT 1010C2 also will SMS to 8 programmable cell phone number to notify the user that the telecom line has been cut off or alarm trigger.
 
6.      Permanent +V output facility – This output is available and ground on the main board. The output voltage is according to power supply and can be used to power on other facility or device
 
7.      Available quad band 850/900/1800/1900mhz frequency
 

Product Origin: CHINA
Model Number: WT-1010C2
Brand Name: WITURA
   
   

Contact Us

Company Name: WITURA CORPORATION SDN BHD
Contact Person: WILLIAM CHIN
Address: 101-12-03&04 Menara Perdana, Jalan Gurdwara
Zip: 10300
Telephone: +6042289053
Fax:

+6042289146

E-mail: support@witura.com
Website: http://www.witura.com

Send Inquiry

Your Name:
Email:
Your Company:
Country/Area:
Content:
CAPTCHA:
CAPTCHA Image Load new image